Contents

  1. Summary
  2. Kernel Versions
  3. Output Of oops
  4. Example program which reproduces oops
  5. Output of ver_linux
  6. Processor Info
  7. Module Info
  8. Loaded driver and hardware information
  9. PCI Info
  10. SCSI Info
  11. RAID Info
  12. Boot Messages
  13. Kernel Config

  1. Summary:

    Kernel oops during heavy I/O on Software RAID device with LVM and XFS (or JFS or reiser)

    I'm using raid 10 mirrored stripes.

  2. Kernel Versions: 
    Linux version 2.6.6 (root@calculon) (gcc version 3.3.3 20040412 (Gentoo Linux 3.3.3-r6, ssp-3.3.2-2, pie-8.7.6)) #2 SMP Fri Nov 19 16:22:24 CST 2004
Linux version 2.6.8.1 (root@calculon) (gcc version 3.3.3 20040412 (Gentoo Linux 3.3.3-r6, ssp-3.3.2-2, pie-8.7.6)) #3 SMP Fri Nov 19 16:23:17 CST 2004
Linux version 2.6.9 (root@calculon) (gcc version 3.3.3 20040412 (Gentoo Linux 3.3.3-r6, ssp-3.3.2-2, pie-8.7.6)) #5 SMP Fri Nov 19 17:03:00 CST 2004
Linux version 2.6.10-rc2-bk4 (root@calculon) (gcc version 3.3.3 20040412 (Gentoo Linux 3.3.3-r6, ssp-3.3.2-2, pie-8.7.6)) #2 SMP Fri Nov 19 16:24:16 CST 2004
  3. Output Of oops:

    2.6.6 

    Oops: 0000 [#1]
SMP 
CPU:    10
EIP:    0060:[]    Not tainted
EFLAGS: 00010017   (2.6.6) 
EIP is at do_page_fault+0x44/0x502
eax: f6d2c000   ebx: 00000296   ecx: 0000007b   edx: 7ebf2381
esi: 00000000   edi: c0114b69   ebp: 00000000   esp: f6d2c0ac
ds: 007b   es: 007b   ss: 0068
Process  (pid: 0, threadinfo=f6d2b000 task=e7aac000)
Stack: 00000000 00000000 00000000 00000000 00000000 00000068 00000000 00000000 
       00030001 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
       00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
Call Trace:
 [] do_page_fault+0x0/0x502
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x502
 [] do_page_fault+0x44/0x502
 [] do_page_fault+0x0/0x502
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x502
 [] do_page_fault+0x44/0x502
 [] do_page_fault+0x0/0x502
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x502
 [] do_page_fault+0x44/0x502
 [] do_page_fault+0x0/0x502
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x502
 [] do_page_fault+0x44/0x502
 [] do_page_fault+0x0/0x502
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x502
 [] do_page_fault+0x44/0x502
 [] do_page_fault+0x0/0x502
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x502
 [] do_page_fault+0x44/0x502
 [] do_page_fault+0x0/0x502
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x502
 [] do_page_fault+0x44/0x502
 [] do_page_fault+0x0/0x502
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x502
 [] do_page_fault+0x44/0x502
 [] do_page_fault+0x0/0x502
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x502
 [] do_page_fault+0x44/0x502
 [] do_page_fault+0x0/0x502
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x502
 [] do_page_fault+0x44/0x502
 [] do_page_fault+0x0/0x502
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x502
 [] do_page_fault+0x44/0x502
 [] do_page_fault+0x0/0x502
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x502
 [] do_page_fault+0x44/0x502
 [] do_page_fault+0x0/0x502
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x502
 [] do_page_fault+0x44/0x502
 [] do_page_fault+0x0/0x502
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x502
 [] do_page_fault+0x44/0x502
 [] do_page_fault+0x0/0x502
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x502
 [] do_page_fault+0x44/0x502
 [] do_page_fault+0x0/0x502
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x502
 [] do_page_fault+0x44/0x502
 [] do_page_fault+0x0/0x502
 [] error_code+0x2d/0x38
 =======================
Unable to handle kernel paging request at virtual address 3d00000a
 printing eip:
c0104be4
*pde = 00000000

    2.6.8.1

    Oops: 0000 [#1]
SMP 
Modules linked in:
CPU:    7
EIP:    0060:[]    Not tainted
EFLAGS: 00010017   (2.6.8.1) 
EIP is at do_page_fault+0x44/0x544
eax: f6db0000   ebx: f7180300   ecx: 0000007b   edx: 00000000
esi: 00000000   edi: c01169d5   ebp: 00000000   esp: f6db0088
ds: 007b   es: 007b   ss: 0068
Process  (pid: 0, threadinfo=f6daf000 task=f6e78000)<1>Unable to handle kernel paging request at virtual address 9fbc92c4
 printing eip:
c01179d6
*pde = 00000000

Stack: 00000100 f6db0100 00000007 0000ffff 00020001 00000068 00060005 0000ffff 
       00030001 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
       00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
Call Trace:
 [] do_page_fault+0x0/0x544
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x544
 [] do_page_fault+0x44/0x544
 [] do_page_fault+0x0/0x544
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x544
 [] do_page_fault+0x44/0x544
 [] do_page_fault+0x0/0x544
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x544
 [] do_page_fault+0x44/0x544
 [] do_page_fault+0x0/0x544
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x544
 [] do_page_fault+0x44/0x544
 [] do_page_fault+0x0/0x544
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x544
 [] do_page_fault+0x44/0x544
 [] do_page_fault+0x0/0x544
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x544
 [] do_page_fault+0x44/0x544
 [] do_page_fault+0x0/0x544
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x544
 [] do_page_fault+0x44/0x544
 [] do_page_fault+0x0/0x544
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x544
 [] do_page_fault+0x44/0x544
 [] do_page_fault+0x0/0x544
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x544
 [] do_page_fault+0x44/0x544
 [] do_page_fault+0x0/0x544
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x544
 [] do_page_fault+0x44/0x544
 [] do_page_fault+0x0/0x544
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x544
 [] do_page_fault+0x44/0x544
 [] do_page_fault+0x0/0x544
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x544
 [] do_page_fault+0x44/0x544
 [] do_page_fault+0x0/0x544
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x544
 [] do_page_fault+0x44/0x544
 [] do_page_fault+0x0/0x544
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x544
 [] do_page_fault+0x44/0x544
 [] do_page_fault+0x0/0x544
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x544
 [] do_page_fault+0x44/0x544
 [] do_page_fault+0x0/0x544
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x544
 [] do_page_fault+0x44/0x544
 [] do_page_fault+0x0/0x544
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x544
 [] do_page_fault+0x44/0x544
Code: 8b 5d 68 85 d2 0f 85 d5 03 00 00 85 db 0f 84 cd 03 00 00 8d 
Unable to handle kernel paging request at virtual address 14ab36c2
 printing eip:
c0124652
*pde = 00000000

    2.6.9

     dm_table_unplug_all+0x41/0x43
 [] __down_failed+0x8/0xc
 [] .text.lock.xfs_buf+0x37/0x3c
 [] pagebuf_iostart+0x6b/0xa3
 [] pagebuf_get+0x143/0x1a1
 [] xfs_trans_read_buf+0x178/0x347
 [] xfs_btree_read_bufs+0x74/0x8b
 [] xfs_alloc_lookup+0x117/0x42d
 [] kmem_zone_zalloc+0x35/0x62
 [] xfs_alloc_ag_vextent_size+0x71/0x505
 [] xfs_alloc_ag_vextent+0xff/0x125
 [] xfs_alloc_vextent+0x400/0x4fc
 [] xfs_bmap_alloc+0xa48/0x1884
 [] autoremove_wake_function+0x0/0x57
 [] autoremove_wake_function+0x0/0x57
 [] xfs_bmbt_get_state+0x2f/0x3b
 [] xfs_bmap_do_search_extents+0xf0/0x453
 [] xfs_bmapi+0x5b7/0x1773
 [] xfs_bmbt_get_state+0x2f/0x3b
 [] xfs_bmap_do_search_extents+0xf0/0x453
 [] smp_apic_timer_interrupt+0x90/0xfa
 [] kmem_zone_zalloc+0x35/0x62
 [] xfs_log_reserve+0xd4/0xdd
 [] xfs_iomap_write_allocate+0x2cb/0x5a6
 [] xfs_mod_incore_sb+0x45/0x53
 [] xfs_iomap+0x40a/0x546
 [] xfs_map_blocks+0x5b/0x95
 [] xfs_page_state_convert+0x564/0x69e
 [] xfs_bmapi+0x2bc/0x1773
 [] test_clear_page_dirty+0xc8/0xdf
 [] linvfs_writepage+0x65/0xfa
 [] pageout+0xae/0xf3
 [] shrink_list+0x1f2/0x42c
 [] __pagevec_release+0x28/0x36
 [] shrink_cache+0x17f/0x3b9
 [] shrink_zone+0xb6/0xd0
 [] shrink_caches+0x6b/0x6d
 [] try_to_free_pages+0xbe/0x1a1
 [] __alloc_pages+0x212/0x35e
 [] generic_file_buffered_write+0x119/0x635
 [] update_atime+0xd0/0xd5
 [] xfs_trans_unlocked_item+0x39/0x57
 [] xfs_write+0x9eb/0xc24
 [] xfs_ichgtime+0x10a/0x10c
 [] linvfs_write+0x8c/0x9d
 [] do_sync_write+0xbe/0xeb
 [] autoremove_wake_function+0x0/0x57
 [] dnotify_parent+0x3a/0xa6
 [] do_sync_write+0x0/0xeb
 [] vfs_write+0xb0/0x119
 [] sys_write+0x51/0x80
 [] syscall_call+0x7/0xb
 =======================
 [] read_profile+0x0/0xc0
 [] write_profile+0x0/0x9d
 [] cpu_callback+0x0/0xd8
 [] r_start+0x0/0x8c
 [] r_stop+0x0/0xa
 [] r_next+0x0/0x3c
 [] r_show+0x0/0x82
 [] seq_lseek+0x0/0xff
 [] seq_read+0x0/0x29b
 [] ioports_open+0x0/0x38
 [] seq_release+0x0/0x2d
 [] seq_lseek+0x0/0xff
 [] seq_read+0x0/0x29b
 [] iomem_open+0x0/0x38
 [] seq_release+0x0/0x2d
 [] proc_readsys+0x0/0x33
 [] proc_writesys+0x0/0x33
 [] proc_opensys+0x0/0x1d
 [] proc_doutsstring+0x0/0xd9
 [] sysctl_string+0x0/0x15a
 [] proc_doutsstring+0x0/0xd9
 [] sysctl_string+0x0/0x15a
 =======================
Unable to handle kernel NULL pointer dereference at virtual address 00000070
 printing eip:
c0116d0e
*pde = 00000000
kernel BUG at kernel/sched.c:921!
invalid operand: 0000 [#1]
SMP 
Modules linked in:
CPU:    3
EIP:    0060:[]    Not tainted VLI
EFLAGS: 00010002   (2.6.9) 
EIP is at resched_task+0x7c/0x86
eax: 00000001   ebx: ef050000   ecx: c3043020   edx: 00000001
esi: f70ef7b0   edi: 00000000   ebp: e3b2e8e4   esp: e3b2e8dc
ds: 007b   es: 007b   ss: 0068
Process pdflush (pid: 6426, threadinfo=e3b2e000 task=f709b1d0)
Stack: f7b6a990 00000282 e3b2e92c c01184e3 f70ef7b0 c3043020 00000000 00000000 
       c0140584 00000002 00000080 c3043020 00000001 00000000 00000003 00000002 
       00000096 dedf0fa4 00000282 c013d6b3 e3b2e940 c011857c f7b6a990 0000000f 
Call Trace:
 [] try_to_wake_up+0x1f1/0x26c
 [] cache_grow+0xab/0x14d
 [] background_writeout+0x0/0xa7
 [] wake_up_process+0x1e/0x22
 [] pdflush_operation+0x74/0xb0
 [] wakeup_bdflush+0x1b/0x35
 [] background_writeout+0x0/0xa7
 [] mempool_alloc+0xab/0x13a
 [] autoremove_wake_function+0x0/0x57
 [] autoremove_wake_function+0x0/0x57
 [] autoremove_wake_function+0x0/0x57
 [] bio_alloc+0x20/0x1ac
 [] autoremove_wake_function+0x0/0x57
 [] bio_clone+0x1d/0x91
 [] make_request+0x207/0x311
 [] autoremove_wake_function+0x0/0x57
 [] generic_make_request+0x163/0x1e3
 [] __map_bio+0x4a/0x11b
 [] __clone_and_map+0xff/0x37b
 [] __split_bio+0xb4/0x139
 [] dm_request+0x71/0xa3
 [] generic_make_request+0x163/0x1e3
 [] mempool_alloc+0x6f/0x13a
 [] autoremove_wake_function+0x0/0x57
 [] submit_bio+0x70/0x120
 [] bio_alloc+0xd9/0x1ac
 [] submit_bh+0x138/0x193
 [] xfs_submit_page+0xab/0xdd
 [] xfs_convert_page+0xed/0x282
 [] find_trylock_page+0x4a/0x58
 [] xfs_probe_delalloc_page+0x1f/0x84
 [] xfs_cluster_write+0x67/0x6d
 [] xfs_page_state_convert+0x2f5/0x69e
 [] unplug_slaves+0x8c/0xa6
 [] find_get_pages_tag+0x71/0x7b
 [] linvfs_writepage+0x65/0xfa
 [] mpage_writepages+0x277/0x3c9
 [] linvfs_writepage+0x0/0xfa
 [] do_writepages+0x3d/0x43
 [] __sync_single_inode+0x63/0x1e5
 [] sync_sb_inodes+0x19e/0x28e
 [] writeback_inodes+0xc4/0xd0
 [] background_writeout+0x6b/0xa7
 [] pdflush+0x0/0x2c
 [] __pdflush+0xbf/0x19d
 [] pdflush+0x28/0x2c
 [] background_writeout+0x0/0xa7
 [] pdflush+0x0/0x2c
 [] kthread+0xb7/0xbd
 [] kthread+0x0/0xbd
 [] kernel_thread_helper+0x5/0xb
Code: 53 10 b8 00 f0 ff ff 21 e0 3b 50 10 74 12 89 55 08 8b 1c 24 8b 74 24 04 89 ec 5d e9 74 b5 ff ff 8b 1c 24 8b 74 24 04 89 ec 5d c3 <0f> 0b 99 03 8b bb 48 c0 eb a3 55 89 e5 83 ec 0c 89 1c 24 89 74 
 <1>Oops: 0000 [#2]
SMP 
Modules linked in:
CPU:    75
EIP:    0060:[]    Not tainted VLI
EFLAGS: 00010017   (2.6.9) 
EIP is at do_page_fault+0x99/0x599
eax: ef030000   ebx: 4b840f04   ecx: 0000007b   edx: 00000000
esi: 00000000   edi: c0116c75   ebp: 00000000   esp: ef030034
ds: 007b   es: 007b   ss: 0068
Process มเ (pid: 4063293, threadinfo=ef02f000 task=e0c10000)
Stack: c05c904c 0000000d ef03004c 00000000 00000000 00000070 ef030108 c048b87c 
       00000000 0000000e 0000000b 00000000 00000000 00000000 00000000 00000000 
       00030001 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
Call Trace:
 [] do_page_fault+0x0/0x599
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x599
 [] do_page_fault+0x99/0x599
 [] do_page_fault+0x0/0x599
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x599
 [] do_page_fault+0x99/0x599
 [] do_page_fault+0x0/0x599
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x599
 [] do_page_fault+0x99/0x599
 [] do_page_fault+0x0/0x599
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x599
 [] do_page_fault+0x99/0x599
 [] do_page_fault+0x0/0x599
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x599
 [] do_page_fault+0x99/0x599
 [] do_page_fault+0x0/0x599
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x599
 [] do_page_fault+0x99/0x599
 [] do_page_fault+0x0/0x599
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x599
 [] do_page_fault+0x99/0x599
 [] do_page_fault+0x0/0x599
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x599
 [] do_page_fault+0x99/0x599
 [] do_page_fault+0x0/0x599
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x599
 [] do_page_fault+0x99/0x599
 [] do_page_fault+0x0/0x599
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x599
 [] do_page_fault+0x99/0x599
 [] do_page_fault+0x0/0x599
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x599
 [] do_page_fault+0x99/0x599
 [] do_page_fault+0x0/0x599
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x599
 [] do_page_fault+0x99/0x599
 [] do_page_fault+0x0/0x599
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x599
 [] do_page_fault+0x99/0x599
 [] do_page_fault+0x0/0x599
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x599
 [] do_page_fault+0x99/0x599
 [] do_page_fault+0x0/0x599
 [] error_code+0x2d/0x38
 [] do_page_fault+0x0/0x599
 [] do_page_fault+0x99/0x599
 =======================
Unable to handle kernel paging request at virtual address 00010017
 printing eip:
c0105cdb
*pde = 00000000
Oops: 0000 [#3]
SMP 
Modules linked in:
CPU:    75
EIP:    0060:[]    Not tainted VLI
EFLAGS: 00010006   (2.6.9) 
EIP is at print_context_stack+0x19/0x64
eax: 0001001a   ebx: 00010000   ecx: c04e2b28   edx: 00000086
esi: 00010017   edi: e0c10000   ebp: 00000068   esp: ef02fe6c
ds: 007b   es: 007b   ss: 0068
Process มเ (pid: 4063293, threadinfo=ef02f000 task=e0c10000)
Stack: e0c10000 c011d886 00010000 00010017 c0105d74 e0c10000 00010017 00000068 
       ef030094 00000018 00000000 00000068 c0105e36 00000000 ef030034 ef02f000 
       ef030000 00000000 c0105fc7 00000000 ef030034 003e003d ef02f000 e0c10000 
Call Trace:
 [] printk+0x17/0x1b
 [] show_trace+0x4e/0x8e
 [] show_stack+0x82/0x97
 [] show_registers+0x15c/0x1c0
 [] die+0x101/0x189
 [] do_page_fault+0x0/0x599
 [] do_page_fault+0x0/0x599
 [] do_page_fault+0x2d3/0x599
 [] end_buffer_async_write+0x0/0xe9
 [] end_buffer_async_write+0x0/0xe9
 [] end_buffer_async_write+0x0/0xe9
 [] do_page_fault+0x0/0x599
 [] error_code+0x2d/0x38
 =======================
Unable to handle kernel paging request at virtual address 000e000b
 printing eip:
c0105cdb
*pde = 00000000
Recursive die() failure, output suppressed
 <1>Unable to handle kernel NULL pointer dereference at virtual address 00000000
 printing eip:
c0107a6f
*pde = 00000000
Oops: 0002 [#4]
SMP 
Modules linked in:
CPU:    75
EIP:    0060:[]    Not tainted VLI
EFLAGS: 00010086   (2.6.9) 
EIP is at do_IRQ+0xba/0x19a
eax: e0c10000   ebx: 00000ff4   ecx: c04e2b28   edx: ef02fb28
esi: 00000000   edi: 00000063   ebp: c0585980   esp: ef02fafc
ds: 007b   es: 007b   ss: 0068
Process มเ (pid: 4063293, threadinfo=ef02f000 task=e0c10000)
Stack: 00000063 f7da15b8 00000000 ef02f000 c0585998 f7f5cb20 ef02f000 ef02fc70 
       c048b8de e0c10000 c0105930 ef02f000 c04e2b28 00000082 ef02fc70 c048b8de 
       e0c10000 c04e0b7c c04b007b ef02007b ffffff63 c01061f1 00000060 00000286 
Call Trace:
 [] common_interrupt+0x18/0x20
 [] die+0x128/0x189
 [] vprintk+0x127/0x16d
 [] do_page_fault+0x0/0x599
 [] do_page_fault+0x0/0x599
 [] do_page_fault+0x2d3/0x599
 [] end_buffer_async_write+0x0/0xe9
 [] __delay+0x12/0x16
 [] serial8250_console_write+0x14e/0x23c
 [] __delay+0x12/0x16
 [] serial8250_console_write+0x14e/0x23c
 [] __call_console_drivers+0x55/0x57
 [] call_console_drivers+0x69/0x11f
 [] do_page_fault+0x0/0x599
 [] error_code+0x2d/0x38
 [] print_context_stack+0x19/0x64
 [] printk+0x17/0x1b
 [] show_trace+0x4e/0x8e
 [] show_stack+0x82/0x97
 [] show_registers+0x15c/0x1c0
 [] die+0x101/0x189
 [] do_page_fault+0x0/0x599
 [] do_page_fault+0x0/0x599
 [] do_page_fault+0x2d3/0x599
 [] end_buffer_async_write+0x0/0xe9
 [] __delay+0x12/0x16
 [] serial8250_console_write+0x14e/0x23c
 [] __delay+0x12/0x16
 [] serial8250_console_write+0x14e/0x23c
 [] __call_console_drivers+0x55/0x57
 [] call_console_drivers+0x69/0x11f
 [] do_page_fault+0x0/0x599
 [] error_code+0x2d/0x38
 [] print_context_stack+0x19/0x64
 [] printk+0x17/0x1b
 [] show_trace+0x4e/0x8e
 [] show_stack+0x82/0x97
 [] show_registers+0x15c/0x1c0
 [] die+0x101/0x189
 [] do_page_fault+0x0/0x599
 [] do_page_fault+0x0/0x599
 [] do_page_fault+0x2d3/0x599
 [] end_buffer_async_write+0x0/0xe9
 [] end_buffer_async_write+0x0/0xe9
 [] end_buffer_async_write+0x0/0xe9
 [] do_page_fault+0x0/0x599
 [] error_code+0x2d/0x38
 =======================
Unable to handle kernel paging request at virtual address 000e000b
 printing eip:
c0105cdb
*pde = 00000000
Oops: 0000 [#5]
SMP 
Modules linked in:
CPU:    75
EIP:    0060:[]    Not tainted VLI
EFLAGS: 00010006   (2.6.9) 
EIP is at print_context_stack+0x19/0x64
eax: 000e000e   ebx: 000e0000   ecx: c04e2b28   edx: 00000086
esi: 000e000b   edi: e0c10000   ebp: 00000068   esp: ef02f934
ds: 007b   es: 007b   ss: 0068
Process มเ (pid: 4063293, threadinfo=ef02f000 task=e0c10000)
Stack: e0c10000 c011d886 000e0000 000e000b c0105d74 e0c10000 000e000b 00000068 
       ef02fb5c 00000018 00000000 00000068 c0105e36 00000000 ef02fafc ef02f000 
       ef02fac8 00000000 c0105fc7 00000000 ef02fafc 003e003d ef02f000 e0c10000 
Call Trace:
 [] printk+0x17/0x1b
 [] show_trace+0x4e/0x8e
 [] show_stack+0x82/0x97
 [] show_registers+0x15c/0x1c0
 [] die+0x101/0x189
 [] do_page_fault+0x0/0x599
 [] do_page_fault+0x0/0x599
 [] do_page_fault+0x2d3/0x599
 [] end_buffer_async_write+0x0/0xe9
 [] __delay+0x12/0x16
 [] serial8250_console_write+0x14e/0x23c
 [] __delay+0x12/0x16
 [] serial8250_console_write+0x14e/0x23c
 [] do_page_fault+0x0/0x599
 [] error_code+0x2d/0x38
 [] do_IRQ+0xba/0x19a
 [] common_interrupt+0x18/0x20
 [] die+0x128/0x189
 [] vprintk+0x127/0x16d
 [] do_page_fault+0x0/0x599
 [] do_page_fault+0x0/0x599
 [] do_page_fault+0x2d3/0x599
 [] end_buffer_async_write+0x0/0xe9
 [] __delay+0x12/0x16
 [] serial8250_console_write+0x14e/0x23c
 [] __delay+0x12/0x16
 [] serial8250_console_write+0x14e/0x23c
 [] __call_console_drivers+0x55/0x57
 [] call_console_drivers+0x69/0x11f
 [] do_page_fault+0x0/0x599
 [] error_code+0x2d/0x38
 [] print_context_stack+0x19/0x64
 [] printk+0x17/0x1b
 [] show_trace+0x4e/0x8e
 [] show_stack+0x82/0x97
 [] show_registers+0x15c/0x1c0
 [] die+0x101/0x189
 [] do_page_fault+0x0/0x599
 [] do_page_fault+0x0/0x599
 [] do_page_fault+0x2d3/0x599
 [] end_buffer_async_write+0x0/0xe9
 [] __delay+0x12/0x16
 [] serial8250_console_write+0x14e/0x23c
 [] __delay+0x12/0x16
 [] serial8250_console_write+0x14e/0x23c
 [] __call_console_drivers+0x55/0x57
 [] call_console_drivers+0x69/0x11f
 [] do_page_fault+0x0/0x599
 [] error_code+0x2d/0x38
 [] print_context_stack+0x19/0x64
 [] printk+0x17/0x1b
 [] show_trace+0x4e/0x8e
 [] show_stack+0x82/0x97
 [] show_registers+0x15c/0x1c0
 [] die+0x101/0x189
 [] do_page_fault+0x0/0x599
 [] do_page_fault+0x0/0x599
 [] do_page_fault+0x2d3/0x599
 [] end_buffer_async_write+0x0/0xe9
 [] end_buffer_async_write+0x0/0xe9
 [] end_buffer_async_write+0x0/0xe9
 [] do_page_fault+0x0/0x599
 [] error_code+0x2d/0x38
 =======================
Unable to handle kernel paging request at virtual address 000e000b
 printing eip:
c0105cdb
*pde = 00000000
Recursive die() failure, output suppressed
 <0>Kernel panic - not syncing: Fatal exception in interrupt

    2.6.10-rc2-bk4

    Oops: 0000 [#1]
SMP 
Modules linked in:
CPU:    0
EIP:    0060:[]    Not tainted VLI
EFLAGS: 00010086   (2.6.10-rc2-bk4) 
EIP is at drive_stat_acct+0x44/0xc3
eax: c012e26e   ebx: f6a7f178   ecx: f65db000   edx: f7e179c0
esi: 00000001   edi: 00000008   ebp: 00000000   esp: f65db098
ds: 007b   es: 007b   ss: 0068
Unable to handle kernel NULL pointer dereference at virtual address 00000070
 printing eip:
c0113e9d
*pde = 00000000
  4. Example program which reproduces oops:

    FWIW, this program always crashes within the first iteration of the outer loop.

    #!/bin/bash

while true; do 
	last=/dev/zero; 
	for i in `seq 1 1 1300`; do 
		num=`printf %04d $i`; 
		echo "writing testfile-$num"; 
		dd if=$last of=testfile-$num bs=1M count=100 &> /dev/null; 
		last="testfile-$num"; 
	done; 
	rm -f testfile-*; 
done
  5. Output of ver_linux: 
    Linux calculon 2.6.6 #2 SMP Fri Nov 19 16:22:24 CST 2004 i686 Intel(R) Xeon(TM) CPU 2.80GHz GenuineIntel GNU/Linux
 
Gnu C                  3.3.3
Gnu make               3.80
binutils               2.14.90.0.8
util-linux             2.12
mount                  2.12
module-init-tools      3.0
e2fsprogs              1.35
jfsutils               1.1.4
xfsprogs               2.6.13
Linux C Library        2.3.3
Dynamic linker (ldd)   2.3.3
Procps                 3.1.15
Net-tools              1.60
Kbd                    1.12
Sh-utils               5.2.1
Modules Loaded
  6. Processor Info: 
    processor       : 0
vendor_id       : GenuineIntel
cpu family      : 15
model           : 2
model name      : Intel(R) Xeon(TM) CPU 2.80GHz
stepping        : 7
cpu MHz         : 2799.924
cache size      : 512 KB
physical id     : 0
siblings        : 2
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid
bogomips        : 5521.40

processor       : 1
vendor_id       : GenuineIntel
cpu family      : 15
model           : 2
model name      : Intel(R) Xeon(TM) CPU 2.80GHz
stepping        : 7
cpu MHz         : 2799.924
cache size      : 512 KB
physical id     : 0
siblings        : 2
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid
bogomips        : 5586.94

processor       : 2
vendor_id       : GenuineIntel
cpu family      : 15
model           : 2
model name      : Intel(R) Xeon(TM) CPU 2.80GHz
stepping        : 7
cpu MHz         : 2799.924
cache size      : 512 KB
physical id     : 3
siblings        : 2
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid
bogomips        : 5586.94

processor       : 3
vendor_id       : GenuineIntel
cpu family      : 15
model           : 2
model name      : Intel(R) Xeon(TM) CPU 2.80GHz
stepping        : 7
cpu MHz         : 2799.924
cache size      : 512 KB
physical id     : 3
siblings        : 2
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid
bogomips        : 5586.94
  7. Module Info: 
    No modules
  8. Loaded driver and hardware information:

    /proc/ioports

    0000-001f : dma1
0020-0021 : pic1
0040-005f : timer
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
02f8-02ff : serial
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial
0400-047f : 0000:00:1f.0
  0408-040b : ACPI timer
  0410-0415 : ACPI CPU throttle
0500-053f : 0000:00:1f.0
0540-055f : 0000:00:1f.3
0cf8-0cff : PCI conf1
8800-88ff : 0000:01:02.0
8c00-8c3f : 0000:01:01.0
  8c00-8c3f : e100
9000-bfff : PCI Bus #02
  9000-afff : PCI Bus #03
  b000-bfff : PCI Bus #04
    b000-b0ff : 0000:04:02.0
      b000-b0ff : aic79xx
    b400-b4ff : 0000:04:02.0
      b400-b4ff : aic79xx
    b800-b8ff : 0000:04:02.1
      b800-b8ff : aic79xx
    bc00-bcff : 0000:04:02.1
      bc00-bcff : aic79xx
c000-dfff : PCI Bus #05
  c000-cfff : PCI Bus #06
    c400-c4ff : 0000:06:03.0
    c800-c8ff : 0000:06:03.1
  d000-dfff : PCI Bus #07
    d880-d8bf : 0000:07:01.0
      d880-d8bf : e1000
    dc00-dc3f : 0000:07:01.1
      dc00-dc3f : e1000
ec00-ec1f : 0000:00:1d.0
  ec00-ec1f : uhci_hcd
ffa0-ffaf : 0000:00:1f.1
  ffa0-ffa7 : ide0
  ffa8-ffaf : ide1

    /proc/iomem

    00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000c8000-000c97ff : Adapter ROM
000c9800-000d27ff : Adapter ROM
000f0000-000fffff : System ROM
00100000-f7feffff : System RAM
  00100000-00441b89 : Kernel code
  00441b8a-0055447f : Kernel data
f7ff0000-f7ffefff : ACPI Tables
f7fff000-f7ffffff : ACPI Non-volatile Storage
f8000000-f80003ff : 0000:00:1f.1
fc000000-fcffffff : 0000:01:02.0
fdea0000-fdebffff : 0000:01:01.0
  fdea0000-fdebffff : e100
fdefe000-fdefefff : 0000:01:01.0
  fdefe000-fdefefff : e100
fdeff000-fdefffff : 0000:01:02.0
fdf00000-fe3fffff : PCI Bus #02
  fdf00000-fdffffff : PCI Bus #03
  fe000000-fe2fffff : PCI Bus #04
    fe2fc000-fe2fdfff : 0000:04:02.0
    fe2fe000-fe2fffff : 0000:04:02.1
  fe3fe000-fe3fefff : 0000:02:1c.0
  fe3ff000-fe3fffff : 0000:02:1e.0
fe400000-feafffff : PCI Bus #05
  fe400000-fe8fffff : PCI Bus #06
    fe8c0000-fe8cffff : 0000:06:03.0
    fe8d0000-fe8dffff : 0000:06:03.0
    fe8e0000-fe8effff : 0000:06:03.1
    fe8f0000-fe8fffff : 0000:06:03.1
  fe900000-fe9fffff : PCI Bus #07
    fe9c0000-fe9dffff : 0000:07:01.0
      fe9c0000-fe9dffff : e1000
    fe9e0000-fe9fffff : 0000:07:01.1
      fe9e0000-fe9fffff : e1000
  feafe000-feafefff : 0000:05:1c.0
  feaff000-feafffff : 0000:05:1e.0
fec00000-fecfffff : reserved
fee00000-fee00fff : reserved
ff400000-ff6fffff : PCI Bus #02
  ff400000-ff4fffff : PCI Bus #03
  ff500000-ff5fffff : PCI Bus #04
ff700000-ff9fffff : PCI Bus #05
  ff700000-ff7fffff : PCI Bus #06
  ff800000-ff8fffff : PCI Bus #07
ffb80000-ffffffff : reserved
  9. PCI Info:

    lspci -vvv

    0000:00:00.0 Host bridge: Intel Corp. E7501 Memory Controller Hub (rev 01)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- Reset- FastB2B-

0000:00:03.0 PCI bridge: Intel Corp. E7500/E7501 Hub Interface C PCI-to-PCI Bridge (rev 01) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Reset- FastB2B-

0000:00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 02) (prog-if 00 [UHCI])
	Subsystem: Intel Corp.: Unknown device 2480
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- Reset- FastB2B-

0000:00:1f.0 ISA bridge: Intel Corp. 82801CA LPC Interface Controller (rev 02)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- 
	Region 1: I/O ports at 
	Region 2: I/O ports at 
	Region 3: I/O ports at 
	Region 4: I/O ports at ffa0 [size=16]
	Region 5: Memory at f8000000 (32-bit, non-prefetchable) [size=1K]

0000:00:1f.3 SMBus: Intel Corp. 82801CA/CAM SMBus Controller (rev 02)
	Subsystem: Intel Corp.: Unknown device 2480
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Reset- FastB2B-
	Capabilities: [50] PCI-X bridge device.
		Secondary Status: 64bit+, 133MHz+, SCD-, USC-, SCO-, SRD- Freq=2
		Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, SCO-, SRD-
		: Upstream: Capacity=0, Commitment Limit=0
		: Downstream: Capacity=0, Commitment Limit=0

0000:02:1e.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04) (prog-if 20 [IO(X)-APIC])
	Subsystem: Intel Corp. 82870P2 P64H2 I/OxAPIC
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- Reset- FastB2B-
	Capabilities: [50] PCI-X bridge device.
		Secondary Status: 64bit+, 133MHz+, SCD-, USC-, SCO-, SRD- Freq=3
		Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, SCO-, SRD-
		: Upstream: Capacity=0, Commitment Limit=0
		: Downstream: Capacity=0, Commitment Limit=0

0000:04:02.0 SCSI storage controller: Adaptec AIC-7902 U320 (rev 03)
	Subsystem: Adaptec: Unknown device ffff
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Reset- FastB2B-
	Capabilities: [50] PCI-X bridge device.
		Secondary Status: 64bit+, 133MHz+, SCD-, USC-, SCO-, SRD- Freq=3
		Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, SCO-, SRD-
		: Upstream: Capacity=0, Commitment Limit=0
		: Downstream: Capacity=0, Commitment Limit=0

0000:05:1e.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04) (prog-if 20 [IO(X)-APIC])
	Subsystem: Intel Corp. 82870P2 P64H2 I/OxAPIC
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- Reset- FastB2B-
	Capabilities: [50] PCI-X bridge device.
		Secondary Status: 64bit+, 133MHz+, SCD-, USC-, SCO-, SRD- Freq=3
		Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, SCO-, SRD-
		: Upstream: Capacity=0, Commitment Limit=0
		: Downstream: Capacity=0, Commitment Limit=0

0000:06:03.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07)
	Subsystem: LSI Logic / Symbios Logic: Unknown device 1040
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR-
  10. SCSI Info:

    /proc/scsi/scsi

    Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: SEAGATE  Model: ST318406LC       Rev: 010A
  Type:   Direct-Access                    ANSI SCSI revision: 03
Host: scsi0 Channel: 00 Id: 01 Lun: 00
  Vendor: SEAGATE  Model: ST318406LC       Rev: 010A
  Type:   Direct-Access                    ANSI SCSI revision: 03
Host: scsi1 Channel: 00 Id: 01 Lun: 00
  Vendor: SEAGATE  Model: ST373307LC       Rev: 0007
  Type:   Direct-Access                    ANSI SCSI revision: 03
Host: scsi1 Channel: 00 Id: 02 Lun: 00
  Vendor: SEAGATE  Model: ST373307LC       Rev: 0007
  Type:   Direct-Access                    ANSI SCSI revision: 03
Host: scsi1 Channel: 00 Id: 04 Lun: 00
  Vendor: SEAGATE  Model: ST373307LC       Rev: 0007
  Type:   Direct-Access                    ANSI SCSI revision: 03
Host: scsi1 Channel: 00 Id: 05 Lun: 00
  Vendor: JMR ELEC Model: FORTRA SERIES.   Rev: 1.21
  Type:   Processor                        ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 01 Lun: 00
  Vendor: SEAGATE  Model: ST373307LC       Rev: 0006
  Type:   Direct-Access                    ANSI SCSI revision: 03
Host: scsi2 Channel: 00 Id: 02 Lun: 00
  Vendor: SEAGATE  Model: ST373307LC       Rev: 0007
  Type:   Direct-Access                    ANSI SCSI revision: 03
Host: scsi2 Channel: 00 Id: 05 Lun: 00
  Vendor: JMR ELEC Model: FORTRA SERIES.   Rev: 1.21
  Type:   Processor                        ANSI SCSI revision: 02
  11. RAID Info:

    /proc/mdstat

    Personalities : [linear] [raid0] [raid1] [raid5] [multipath] [raid6] 
md4 : active raid1 md2[0] md3[1]
      143363776 blocks [2/2] [UU]
      
md1 : active raid1 sdb3[1] sda3[0]
      12924224 blocks [2/2] [UU]
      
md2 : active raid0 sdd1[1] sdc1[0]
      143363840 blocks 32k chunks
      
md3 : active raid0 sdg1[0] sdf1[1]
      143363840 blocks 32k chunks
      
md0 : active raid1 sdb1[1] sda1[0]
      995904 blocks [2/2] [UU]
      
unused devices:

    mdadm --detail /dev/md0

    /dev/md0:
        Version : 00.90.01
  Creation Time : Thu Nov  4 10:21:57 2004
     Raid Level : raid1
     Array Size : 995904 (972.56 MiB 1019.81 MB)
    Device Size : 995904 (972.56 MiB 1019.81 MB)
   Raid Devices : 2
  Total Devices : 2
Preferred Minor : 0
    Persistence : Superblock is persistent

    Update Time : Mon Nov 22 10:07:30 2004
          State : clean
 Active Devices : 2
Working Devices : 2
 Failed Devices : 0
  Spare Devices : 0


    Number   Major   Minor   RaidDevice State
       0       8        1        0      active sync   /dev/sda1
       1       8       17        1      active sync   /dev/sdb1
           UUID : b4fc9db3:8e3dd741:fa6e8488:94027aa9
         Events : 0.6632

    mdadm --detail /dev/md1

    /dev/md1:
        Version : 00.90.01
  Creation Time : Thu Nov 11 14:29:28 2004
     Raid Level : raid1
     Array Size : 12924224 (12.33 GiB 13.23 GB)
    Device Size : 12924224 (12.33 GiB 13.23 GB)
   Raid Devices : 2
  Total Devices : 2
Preferred Minor : 1
    Persistence : Superblock is persistent

    Update Time : Mon Nov 22 10:32:55 2004
          State : clean
 Active Devices : 2
Working Devices : 2
 Failed Devices : 0
  Spare Devices : 0


    Number   Major   Minor   RaidDevice State
       0       8        3        0      active sync   /dev/sda3
       1       8       19        1      active sync   /dev/sdb3
           UUID : 451d8a4b:00a532e9:420e9472:7ec250b7
         Events : 0.3176

    mdadm --detail /dev/md2

    /dev/md2:
        Version : 00.90.01
  Creation Time : Wed Nov 10 13:49:41 2004
     Raid Level : raid0
     Array Size : 143363840 (136.72 GiB 146.80 GB)
   Raid Devices : 2
  Total Devices : 2
Preferred Minor : 2
    Persistence : Superblock is persistent

    Update Time : Fri Nov 19 10:56:54 2004
          State : clean
 Active Devices : 2
Working Devices : 2
 Failed Devices : 0
  Spare Devices : 0

     Chunk Size : 32K

    Number   Major   Minor   RaidDevice State
       0       8       33        0      active sync   /dev/sdc1
       1       8       49        1      active sync   /dev/sdd1
           UUID : 490e2896:1454fd6a:ab6ca2ee:c604587d
         Events : 0.8

    mdadm --detail /dev/md3

    /dev/md3:
        Version : 00.90.01
  Creation Time : Thu Nov 11 09:05:51 2004
     Raid Level : raid0
     Array Size : 143363840 (136.72 GiB 146.80 GB)
   Raid Devices : 2
  Total Devices : 2
Preferred Minor : 3
    Persistence : Superblock is persistent

    Update Time : Fri Nov 19 10:56:54 2004
          State : clean
 Active Devices : 2
Working Devices : 2
 Failed Devices : 0
  Spare Devices : 0

     Chunk Size : 32K

    Number   Major   Minor   RaidDevice State
       0       8       97        0      active sync   /dev/sdg1
       1       8       81        1      active sync   /dev/sdf1
           UUID : cc83e519:5dc0385a:83a55403:7b87a920
         Events : 0.9

    mdadm --detail /dev/md4

    /dev/md4:
        Version : 00.90.01
  Creation Time : Fri Nov 19 11:00:14 2004
     Raid Level : raid1
     Array Size : 143363776 (136.72 GiB 146.80 GB)
    Device Size : 143363776 (136.72 GiB 146.80 GB)
   Raid Devices : 2
  Total Devices : 2
Preferred Minor : 4
    Persistence : Superblock is persistent

    Update Time : Mon Nov 22 10:32:50 2004
          State : clean
 Active Devices : 2
Working Devices : 2
 Failed Devices : 0
  Spare Devices : 0


    Number   Major   Minor   RaidDevice State
       0       9        2        0      active sync   /dev/md2
       1       9        3        1      active sync   /dev/md3
           UUID : 6aa6fd6c:95afa59a:157febbf:f8383bee
         Events : 0.178
  12. Boot Messages:

    2.6.6

    Linux version 2.6.6 (root@calculon) (gcc version 3.3.3 20040412 (Gentoo Linux 3.3.3-r6, ssp-3.3.2-2, pie-8.7.6)) #2 SMP Fri Nov 19 16:22:24 CST 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000f7ff0000 (usable)
 BIOS-e820: 00000000f7ff0000 - 00000000f7fff000 (ACPI data)
 BIOS-e820: 00000000f7fff000 - 00000000f8000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000108000000 (usable)
Warning only 4GB will be used.
Use a PAE enabled kernel.
3200MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000ff780
On node 0 totalpages: 1048576
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 225280 pages, LIFO batch:16
  HighMem zone: 819200 pages, LIFO batch:16
DMI 2.3 present.
ACPI: RSDP (v000 ACPIAM                                    ) @ 0x000f6870
ACPI: RSDT (v001 A M I  OEMRSDT  0x01000416 MSFT 0x00000097) @ 0xf7ff0000
ACPI: FADT (v002 A M I  OEMFACP  0x01000416 MSFT 0x00000097) @ 0xf7ff0200
ACPI: MADT (v001 A M I  OEMAPIC  0x01000416 MSFT 0x00000097) @ 0xf7ff0300
ACPI: OEMB (v001 A M I  OEMBIOS  0x01000416 MSFT 0x00000097) @ 0xf7fff040
ACPI: DSDT (v001  0ABBP 0ABBP003 0x00000003 MSFT 0x0100000d) @ 0x00000000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
Processor #6 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
Processor #1 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled)
Processor #7 15:2 APIC version 20
ACPI: IOAPIC (id[0x08] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 8
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec80000] global_irq_base[0x18])
IOAPIC[1]: Assigned apic_id 9
IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
ACPI: IOAPIC (id[0x0a] address[0xfec80400] global_irq_base[0x30])
IOAPIC[2]: Assigned apic_id 10
IOAPIC[2]: apic_id 10, version 32, address 0xfec80400, GSI 48-71
ACPI: IOAPIC (id[0x0b] address[0xfec81000] global_irq_base[0x48])
IOAPIC[3]: Assigned apic_id 11
IOAPIC[3]: apic_id 11, version 32, address 0xfec81000, GSI 72-95
ACPI: IOAPIC (id[0x0c] address[0xfec81400] global_irq_base[0x60])
IOAPIC[4]: Assigned apic_id 12
IOAPIC[4]: apic_id 12, version 32, address 0xfec81400, GSI 96-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Enabling APIC mode:  Flat.  Using 5 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: BOOT_IMAGE=Linux2.6.6 ro root=900 gentoo=nodevfs console=ttyS0,38400
Initializing CPU#0
CPU 0 irqstacks, hard=c0593000 soft=c058f000
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 2799.943 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Memory: 4023820k/4194304k available (3334k kernel code, 38176k reserved, 1098k data, 208k init, 3145664k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 5521.40 BogoMIPS
Dentry cache hash table entries: 524288 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 262144 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU#0: Thermal monitoring enabled
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU0: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07
per-CPU timeslice cutoff: 1463.17 usecs.
task migration cache decay timeout: 2 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c0594000 soft=c0590000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 5586.94 BogoMIPS
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU#1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU#1: Thermal monitoring enabled
CPU1: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07
Booting processor 2/6 eip 3000
CPU 2 irqstacks, hard=c0595000 soft=c0591000
Initializing CPU#2
masked ExtINT on CPU#2
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 5586.94 BogoMIPS
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 3
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
CPU#2: Intel P4/Xeon Extended MCE MSRs (12) available
CPU#2: Thermal monitoring enabled
CPU2: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07
Booting processor 3/7 eip 3000
CPU 3 irqstacks, hard=c0596000 soft=c0592000
Initializing CPU#3
masked ExtINT on CPU#3
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 5586.94 BogoMIPS
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 3
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
CPU#3: Intel P4/Xeon Extended MCE MSRs (12) available
CPU#3: Thermal monitoring enabled
CPU3: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07
Total of 4 processors activated (22282.24 BogoMIPS).
cpu_sibling_map[0] = 1
cpu_sibling_map[1] = 0
cpu_sibling_map[2] = 3
cpu_sibling_map[3] = 2
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2798.0666 MHz.
..... host bus clock speed is 133.0269 MHz.
checking TSC synchronization across 4 CPUs: passed.
Brought up 4 CPUs
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=7
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
testing the IO APIC.......................
.................................... done.
PCI: Using ACPI for IRQ routing
Machine check exception polling timer started.
Starting balanced_irq
audit: initializing netlink socket (disabled)
audit(1101141631.799:0): initialized
highmem bounce pool size: 64 pages
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
udf: registering filesystem
SGI XFS with large block numbers, no debug enabled
Initializing Cryptographic API
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU1] (supports C1, 8 throttling states)
ACPI: Processor [CPU2] (supports C1)
ACPI: Processor [CPU3] (supports C1)
ACPI: Processor [CPU4] (supports C1)
Real Time Clock Driver v1.12
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Using anticipatory io scheduler
FDC 0 is a post-1991 82077
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 5.2.39-k2
Copyright (c) 1999-2004 Intel Corporation.
eth0: Intel(R) PRO/1000 Network Connection
eth1: Intel(R) PRO/1000 Network Connection
e100: Intel(R) PRO/100 Network Driver, 3.0.17
e100: Copyright(c) 1999-2004 Intel Corporation
e100: eth2: e100_probe: addr 0xfdefe000, irq 19, MAC addr 00:E0:81:25:CF:17
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH3: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ICH3: chipset revision 2
ICH3: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
hda: SR244W, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11
        
        aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs

(scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, 16bit)
(scsi0:A:1): 160.000MB/s transfers (80.000MHz DT, 16bit)
  Vendor: SEAGATE   Model: ST318406LC        Rev: 010A
  Type:   Direct-Access                      ANSI SCSI revision: 03
scsi0:A:0:0: Tagged Queuing enabled.  Depth 32
  Vendor: SEAGATE   Model: ST318406LC        Rev: 010A
  Type:   Direct-Access                      ANSI SCSI revision: 03
scsi0:A:1:0: Tagged Queuing enabled.  Depth 32
scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11
        
        aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs

(scsi1:A:1): 160.000MB/s transfers (80.000MHz DT|IU|QAS, 16bit)
(scsi1:A:2): 160.000MB/s transfers (80.000MHz DT|IU|QAS, 16bit)
(scsi1:A:4): 160.000MB/s transfers (80.000MHz DT|IU|QAS, 16bit)
  Vendor: SEAGATE   Model: ST373307LC        Rev: 0007
  Type:   Direct-Access                      ANSI SCSI revision: 03
scsi1:A:1:0: Tagged Queuing enabled.  Depth 32
  Vendor: SEAGATE   Model: ST373307LC        Rev: 0007
  Type:   Direct-Access                      ANSI SCSI revision: 03
scsi1:A:2:0: Tagged Queuing enabled.  Depth 32
  Vendor: SEAGATE   Model: ST373307LC        Rev: 0007
  Type:   Direct-Access                      ANSI SCSI revision: 03
scsi1:A:4:0: Tagged Queuing enabled.  Depth 32
  Vendor: JMR ELEC  Model: FORTRA SERIES.    Rev: 1.21
  Type:   Processor                          ANSI SCSI revision: 02
SCSI device sda: 35843670 512-byte hdwr sectors (18352 MB)
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 35843670 512-byte hdwr sectors (18352 MB)
SCSI device sdb: drive cache: write back
 sdb: sdb1 sdb2 sdb3
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
SCSI device sdc: 143374744 512-byte hdwr sectors (73408 MB)
SCSI device sdc: drive cache: write back
 sdc: sdc1
Attached scsi disk sdc at scsi1, channel 0, id 1, lun 0
SCSI device sdd: 143374744 512-byte hdwr sectors (73408 MB)
SCSI device sdd: drive cache: write back
 sdd: sdd1
Attached scsi disk sdd at scsi1, channel 0, id 2, lun 0
SCSI device sde: 143374744 512-byte hdwr sectors (73408 MB)
SCSI device sde: drive cache: write back
 sde: sde1
Attached scsi disk sde at scsi1, channel 0, id 4, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
Attached scsi generic sg1 at scsi0, channel 0, id 1, lun 0,  type 0
Attached scsi generic sg2 at scsi1, channel 0, id 1, lun 0,  type 0
Attached scsi generic sg3 at scsi1, channel 0, id 2, lun 0,  type 0
Attached scsi generic sg4 at scsi1, channel 0, id 4, lun 0,  type 0
Attached scsi generic sg5 at scsi1, channel 0, id 5, lun 0,  type 3
Fusion MPT base driver 3.01.03
Copyright (c) 1999-2004 LSI Logic Corporation
mptbase: Initiating ioc0 bringup
ioc0: 53C1030: Capabilities={Initiator}
mptbase: Initiating ioc1 bringup
ioc1: 53C1030: Capabilities={Initiator}
Fusion MPT SCSI Host driver 3.01.03
scsi2 : ioc0: LSI53C1030, FwRev=01013d00h, Ports=1, MaxQ=255, IRQ=24
  Vendor: SEAGATE   Model: ST373307LC        Rev: 0006
  Type:   Direct-Access                      ANSI SCSI revision: 03
SCSI device sdf: 143374744 512-byte hdwr sectors (73408 MB)
SCSI device sdf: drive cache: write back
 sdf: sdf1
Attached scsi disk sdf at scsi2, channel 0, id 1, lun 0
Attached scsi generic sg6 at scsi2, channel 0, id 1, lun 0,  type 0
  Vendor: SEAGATE   Model: ST373307LC        Rev: 0007
  Type:   Direct-Access                      ANSI SCSI revision: 03
SCSI device sdg: 143374744 512-byte hdwr sectors (73408 MB)
SCSI device sdg: drive cache: write back
 sdg: sdg1
Attached scsi disk sdg at scsi2, channel 0, id 2, lun 0
Attached scsi generic sg7 at scsi2, channel 0, id 2, lun 0,  type 0
  Vendor: JMR ELEC  Model: FORTRA SERIES.    Rev: 1.21
  Type:   Processor                          ANSI SCSI revision: 02
Attached scsi generic sg8 at scsi2, channel 0, id 5, lun 0,  type 3
scsi3 : ioc1: LSI53C1030, FwRev=01013d00h, Ports=1, MaxQ=255, IRQ=25
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:1d.0: Intel Corp. 82801CA/CAM USB (Hub #1)
uhci_hcd 0000:00:1d.0: irq 16, io base 0000ec00
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver hiddev
usbcore: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
   8regs     :  3256.000 MB/sec
   8regs_prefetch:  2880.000 MB/sec
   32regs    :  2064.000 MB/sec
   32regs_prefetch:  1956.000 MB/sec
   pIII_sse  :  3644.000 MB/sec
   pII_mmx   :  4596.000 MB/sec
   p5_mmx    :  4592.000 MB/sec
raid5: using function: pIII_sse (3644.000 MB/sec)
raid6: int32x1    777 MB/s
raid6: int32x2   1062 MB/s
raid6: int32x4    742 MB/s
raid6: int32x8    550 MB/s
raid6: mmxx1     2273 MB/s
raid6: mmxx2     2878 MB/s
raid6: sse1x1    1492 MB/s
raid6: sse1x2    2070 MB/s
raid6: sse2x1    2417 MB/s
raid6: sse2x2    2996 MB/s
raid6: using algorithm sse2x2 (2996 MB/s)
md: raid6 personality registered as nr 8
md: multipath personality registered as nr 7
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
NET: Registered protocol family 2
IP: routing cache hash table of 32768 buckets, 256Kbytes
TCP: Hash tables configured (established 524288 bind 65536)
ip_conntrack version 2.1 (8192 buckets, 65536 max) - 300 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost .  http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S5)
md: Autodetecting RAID arrays.
md: autorun ...
md: considering sdg1 ...
md:  adding sdg1 ...
md:  adding sdf1 ...
md: sde1 has different UUID to sdg1
md: sdd1 has different UUID to sdg1
md: sdc1 has different UUID to sdg1
md: sdb3 has different UUID to sdg1
md: sdb1 has different UUID to sdg1
md: sda3 has different UUID to sdg1
md: sda1 has different UUID to sdg1
md: created md3
md: bind
md: bind
md: running: 
md3: setting max_sectors to 64, segment boundary to 16383
raid0: looking at sdg1
raid0:   comparing sdg1(71681920) with sdg1(71681920)
raid0:   END
raid0:   ==> UNIQUE
raid0: 1 zones
raid0: looking at sdf1
raid0:   comparing sdf1(71681920) with sdg1(71681920)
raid0:   EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 143363840 blocks.
raid0 : conf->hash_spacing is 143363840 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 4 bytes for hash.
md: considering sde1 ...
md:  adding sde1 ...
md: sdd1 has different UUID to sde1
md: sdc1 has different UUID to sde1
md: sdb3 has different UUID to sde1
md: sdb1 has different UUID to sde1
md: sda3 has different UUID to sde1
md: sda1 has different UUID to sde1
md: created md2
md: bind
md: running: 
raid5: device sde1 operational as raid disk 0
raid5: not enough operational devices for md2 (5/6 failed)
RAID5 conf printout:
 --- rd:6 wd:1 fd:5
 disk 0, o:1, dev:sde1
raid5: failed to run raid set md2
md: pers->run() failed ...
md :do_md_run() returned -22
md: md2 stopped.
md: unbind
md: export_rdev(sde1)
md: considering sdd1 ...
md:  adding sdd1 ...
md:  adding sdc1 ...
md: sdb3 has different UUID to sdd1
md: sdb1 has different UUID to sdd1
md: sda3 has different UUID to sdd1
md: sda1 has different UUID to sdd1
md: created md2
md: bind
md: bind
md: running: 
md2: setting max_sectors to 64, segment boundary to 16383
raid0: looking at sdd1
raid0:   comparing sdd1(71681920) with sdd1(71681920)
raid0:   END
raid0:   ==> UNIQUE
raid0: 1 zones
raid0: looking at sdc1
raid0:   comparing sdc1(71681920) with sdd1(71681920)
raid0:   EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 143363840 blocks.
raid0 : conf->hash_spacing is 143363840 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 4 bytes for hash.
md: considering sdb3 ...
md:  adding sdb3 ...
md: sdb1 has different UUID to sdb3
md:  adding sda3 ...
md: sda1 has different UUID to sdb3
md: created md1
md: bind
md: bind
md: running: 
raid1: raid set md1 active with 2 out of 2 mirrors
md: considering sdb1 ...
md:  adding sdb1 ...
md:  adding sda1 ...
md: created md0
md: bind
md: bind
md: running: 
raid1: raid set md0 active with 2 out of 2 mirrors
md: ... autorun DONE.
found reiserfs format "3.6" with standard journal
reiserfs: using ordered data mode
Reiserfs journal params: device md0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (md0) for (md0)
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 208k freed

    2.6.8.1

    Linux version 2.6.8.1 (root@calculon) (gcc version 3.3.3 20040412 (Gentoo Linux 3.3.3-r6, ssp-3.3.2-2, pie-8.7.6)) #3 SMP Fri Nov 19 16:23:17 CST 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000f7ff0000 (usable)
 BIOS-e820: 00000000f7ff0000 - 00000000f7fff000 (ACPI data)
 BIOS-e820: 00000000f7fff000 - 00000000f8000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000108000000 (usable)
Warning only 4GB will be used.
Use a PAE enabled kernel.
3200MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000ff780
DMI 2.3 present.
ACPI: RSDP (v000 ACPIAM                                    ) @ 0x000f6870
ACPI: RSDT (v001 A M I  OEMRSDT  0x01000416 MSFT 0x00000097) @ 0xf7ff0000
ACPI: FADT (v002 A M I  OEMFACP  0x01000416 MSFT 0x00000097) @ 0xf7ff0200
ACPI: MADT (v001 A M I  OEMAPIC  0x01000416 MSFT 0x00000097) @ 0xf7ff0300
ACPI: OEMB (v001 A M I  OEMBIOS  0x01000416 MSFT 0x00000097) @ 0xf7fff040
ACPI: DSDT (v001  0ABBP 0ABBP003 0x00000003 MSFT 0x0100000d) @ 0x00000000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
Processor #6 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
Processor #1 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled)
Processor #7 15:2 APIC version 20
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: Assigned apic_id 8
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
IOAPIC[1]: Assigned apic_id 9
IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
ACPI: IOAPIC (id[0x0a] address[0xfec80400] gsi_base[48])
IOAPIC[2]: Assigned apic_id 10
IOAPIC[2]: apic_id 10, version 32, address 0xfec80400, GSI 48-71
ACPI: IOAPIC (id[0x0b] address[0xfec81000] gsi_base[72])
IOAPIC[3]: Assigned apic_id 11
IOAPIC[3]: apic_id 11, version 32, address 0xfec81000, GSI 72-95
ACPI: IOAPIC (id[0x0c] address[0xfec81400] gsi_base[96])
IOAPIC[4]: Assigned apic_id 12
IOAPIC[4]: apic_id 12, version 32, address 0xfec81400, GSI 96-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Enabling APIC mode:  Flat.  Using 5 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: BOOT_IMAGE=Linux2.6.8.1 ro root=900 gentoo=nodevfs console=ttyS0,38400
Initializing CPU#0
CPU 0 irqstacks, hard=c05ca000 soft=c05c6000
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 2799.791 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 4022816k/4194304k available (3454k kernel code, 39180k reserved, 1195k data, 212k init, 3145664k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 5521.40 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07
per-CPU timeslice cutoff: 1463.17 usecs.
task migration cache decay timeout: 2 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c05cb000 soft=c05c7000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 5586.94 BogoMIPS
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07
Booting processor 2/6 eip 3000
CPU 2 irqstacks, hard=c05cc000 soft=c05c8000
Initializing CPU#2
masked ExtINT on CPU#2
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 5586.94 BogoMIPS
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 3
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
CPU2: Intel P4/Xeon Extended MCE MSRs (12) available
CPU2: Thermal monitoring enabled
CPU2: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07
Booting processor 3/7 eip 3000
CPU 3 irqstacks, hard=c05cd000 soft=c05c9000
Initializing CPU#3
masked ExtINT on CPU#3
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 5586.94 BogoMIPS
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 3
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
CPU3: Intel P4/Xeon Extended MCE MSRs (12) available
CPU3: Thermal monitoring enabled
CPU3: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07
Total of 4 processors activated (22282.24 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2798.0895 MHz.
..... host bus clock speed is 133.0280 MHz.
checking TSC synchronization across 4 CPUs: passed.
Brought up 4 CPUs
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=7
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
ACPI: PCI interrupt 0000:07:01.0[A] -> GSI 48 (level, low) -> IRQ 48
ACPI: PCI interrupt 0000:07:01.1[B] -> GSI 49 (level, low) -> IRQ 49
ACPI: PCI interrupt 0000:06:03.0[A] -> GSI 24 (level, low) -> IRQ 24
ACPI: PCI interrupt 0000:06:03.1[B] -> GSI 25 (level, low) -> IRQ 25
ACPI: PCI interrupt 0000:04:02.0[A] -> GSI 98 (level, low) -> IRQ 98
ACPI: PCI interrupt 0000:04:02.1[B] -> GSI 99 (level, low) -> IRQ 99
ACPI: PCI interrupt 0000:01:01.0[A] -> GSI 19 (level, low) -> IRQ 19
ACPI: PCI interrupt 0000:01:02.0[A] -> GSI 18 (level, low) -> IRQ 18
testing the IO APIC.......................
.................................... done.
Machine check exception polling timer started.
Starting balanced_irq
audit: initializing netlink socket (disabled)
audit(1101141805.4294966025:0): initialized
highmem bounce pool size: 64 pages
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
udf: registering filesystem
SGI XFS with large block numbers, no debug enabled
Initializing Cryptographic API
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU1] (supports C1, 8 throttling states)
ACPI: Processor [CPU2] (supports C1)
ACPI: Processor [CPU3] (supports C1)
ACPI: Processor [CPU4] (supports C1)
Real Time Clock Driver v1.12
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Using anticipatory io scheduler
FDC 0 is a post-1991 82077
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 5.2.52-k4
Copyright (c) 1999-2004 Intel Corporation.
ACPI: PCI interrupt 0000:07:01.0[A] -> GSI 48 (level, low) -> IRQ 48
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI interrupt 0000:07:01.1[B] -> GSI 49 (level, low) -> IRQ 49
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
e100: Intel(R) PRO/100 Network Driver, 3.0.18
e100: Copyright(c) 1999-2004 Intel Corporation
ACPI: PCI interrupt 0000:01:01.0[A] -> GSI 19 (level, low) -> IRQ 19
e100: eth2: e100_probe: addr 0xfdefe000, irq 19, MAC addr 00:E0:81:25:CF:17
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH3: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ICH3: chipset revision 2
ICH3: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
hda: SR244W, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ACPI: PCI interrupt 0000:04:02.0[A] -> GSI 98 (level, low) -> IRQ 98
ACPI: PCI interrupt 0000:04:02.1[B] -> GSI 99 (level, low) -> IRQ 99
scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11
        
        aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs

(scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, 16bit)
(scsi0:A:1): 160.000MB/s transfers (80.000MHz DT, 16bit)
  Vendor: SEAGATE   Model: ST318406LC        Rev: 010A
  Type:   Direct-Access                      ANSI SCSI revision: 03
scsi0:A:0:0: Tagged Queuing enabled.  Depth 32
  Vendor: SEAGATE   Model: ST318406LC        Rev: 010A
  Type:   Direct-Access                      ANSI SCSI revision: 03
scsi0:A:1:0: Tagged Queuing enabled.  Depth 32
scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11
        
        aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs

(scsi1:A:1): 160.000MB/s transfers (80.000MHz DT|IU|QAS, 16bit)
(scsi1:A:2): 160.000MB/s transfers (80.000MHz DT|IU|QAS, 16bit)
(scsi1:A:4): 160.000MB/s transfers (80.000MHz DT|IU|QAS, 16bit)
  Vendor: SEAGATE   Model: ST373307LC        Rev: 0007
  Type:   Direct-Access                      ANSI SCSI revision: 03
scsi1:A:1:0: Tagged Queuing enabled.  Depth 32
  Vendor: SEAGATE   Model: ST373307LC        Rev: 0007
  Type:   Direct-Access                      ANSI SCSI revision: 03
scsi1:A:2:0: Tagged Queuing enabled.  Depth 32
  Vendor: SEAGATE   Model: ST373307LC        Rev: 0007
  Type:   Direct-Access                      ANSI SCSI revision: 03
scsi1:A:4:0: Tagged Queuing enabled.  Depth 32
  Vendor: JMR ELEC  Model: FORTRA SERIES.    Rev: 1.21
  Type:   Processor                          ANSI SCSI revision: 02
SCSI device sda: 35843670 512-byte hdwr sectors (18352 MB)
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 35843670 512-byte hdwr sectors (18352 MB)
SCSI device sdb: drive cache: write back
 sdb: sdb1 sdb2 sdb3
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
SCSI device sdc: 143374744 512-byte hdwr sectors (73408 MB)
SCSI device sdc: drive cache: write back
 sdc: sdc1
Attached scsi disk sdc at scsi1, channel 0, id 1, lun 0
SCSI device sdd: 143374744 512-byte hdwr sectors (73408 MB)
SCSI device sdd: drive cache: write back
 sdd: sdd1
Attached scsi disk sdd at scsi1, channel 0, id 2, lun 0
SCSI device sde: 143374744 512-byte hdwr sectors (73408 MB)
SCSI device sde: drive cache: write back
 sde: sde1
Attached scsi disk sde at scsi1, channel 0, id 4, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
Attached scsi generic sg1 at scsi0, channel 0, id 1, lun 0,  type 0
Attached scsi generic sg2 at scsi1, channel 0, id 1, lun 0,  type 0
Attached scsi generic sg3 at scsi1, channel 0, id 2, lun 0,  type 0
Attached scsi generic sg4 at scsi1, channel 0, id 4, lun 0,  type 0
Attached scsi generic sg5 at scsi1, channel 0, id 5, lun 0,  type 3
Fusion MPT base driver 3.01.09
Copyright (c) 1999-2004 LSI Logic Corporation
ACPI: PCI interrupt 0000:06:03.0[A] -> GSI 24 (level, low) -> IRQ 24
mptbase: Initiating ioc0 bringup
ioc0: 53C1030: Capabilities={Initiator}
ACPI: PCI interrupt 0000:06:03.1[B] -> GSI 25 (level, low) -> IRQ 25
mptbase: Initiating ioc1 bringup
ioc1: 53C1030: Capabilities={Initiator}
Fusion MPT SCSI Host driver 3.01.09
scsi2 : ioc0: LSI53C1030, FwRev=01013d00h, Ports=1, MaxQ=255, IRQ=24
  Vendor: SEAGATE   Model: ST373307LC        Rev: 0006
  Type:   Direct-Access                      ANSI SCSI revision: 03
SCSI device sdf: 143374744 512-byte hdwr sectors (73408 MB)
SCSI device sdf: drive cache: write back
 sdf: sdf1
Attached scsi disk sdf at scsi2, channel 0, id 1, lun 0
Attached scsi generic sg6 at scsi2, channel 0, id 1, lun 0,  type 0
  Vendor: SEAGATE   Model: ST373307LC        Rev: 0007
  Type:   Direct-Access                      ANSI SCSI revision: 03
SCSI device sdg: 143374744 512-byte hdwr sectors (73408 MB)
SCSI device sdg: drive cache: write back
 sdg: sdg1
Attached scsi disk sdg at scsi2, channel 0, id 2, lun 0
Attached scsi generic sg7 at scsi2, channel 0, id 2, lun 0,  type 0
  Vendor: JMR ELEC  Model: FORTRA SERIES.    Rev: 1.21
  Type:   Processor                          ANSI SCSI revision: 02
Attached scsi generic sg8 at scsi2, channel 0, id 5, lun 0,  type 3
scsi3 : ioc1: LSI53C1030, FwRev=01013d00h, Ports=1, MaxQ=255, IRQ=25
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: Intel Corp. 82801CA/CAM USB (Hub #1)
uhci_hcd 0000:00:1d.0: irq 16, io base 0000ec00
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: automatically using best checksumming function: pIII_sse
   pIII_sse  :  3596.000 MB/sec
raid5: using function: pIII_sse (3596.000 MB/sec)
raid6: int32x1    773 MB/s
raid6: int32x2   1113 MB/s
raid6: int32x4    738 MB/s
raid6: int32x8    546 MB/s
raid6: mmxx1     2273 MB/s
raid6: mmxx2     2859 MB/s
raid6: sse1x1    1503 MB/s
raid6: sse1x2    2058 MB/s
raid6: sse2x1    2304 MB/s
raid6: sse2x2    3097 MB/s
raid6: using algorithm sse2x2 (3097 MB/s)
md: raid6 personality registered as nr 8
md: multipath personality registered as nr 7
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
Crash dump driver initialized.
block device driver for LKCD registered
network device driver for LKCD registered
dump gzip safety buffer: f78c2000, 4096
NET: Registered protocol family 2
IP: routing cache hash table of 32768 buckets, 256Kbytes
TCP: Hash tables configured (established 524288 bind 65536)
ip_conntrack version 2.1 (8192 buckets, 65536 max) - 300 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost .  http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S5)
md: Autodetecting RAID arrays.
md: autorun ...
md: considering sdg1 ...
md:  adding sdg1 ...
md:  adding sdf1 ...
md: sde1 has different UUID to sdg1
md: sdd1 has different UUID to sdg1
md: sdc1 has different UUID to sdg1
md: sdb3 has different UUID to sdg1
md: sdb1 has different UUID to sdg1
md: sda3 has different UUID to sdg1
md: sda1 has different UUID to sdg1
md: created md3
md: bind
md: bind
md: running: 
md3: setting max_sectors to 64, segment boundary to 16383
raid0: looking at sdg1
raid0:   comparing sdg1(71681920) with sdg1(71681920)
raid0:   END
raid0:   ==> UNIQUE
raid0: 1 zones
raid0: looking at sdf1
raid0:   comparing sdf1(71681920) with sdg1(71681920)
raid0:   EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 143363840 blocks.
raid0 : conf->hash_spacing is 143363840 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 4 bytes for hash.
md: considering sde1 ...
md:  adding sde1 ...
md: sdd1 has different UUID to sde1
md: sdc1 has different UUID to sde1
md: sdb3 has different UUID to sde1
md: sdb1 has different UUID to sde1
md: sda3 has different UUID to sde1
md: sda1 has different UUID to sde1
md: created md2
md: bind
md: running: 
raid5: device sde1 operational as raid disk 0
raid5: not enough operational devices for md2 (5/6 failed)
RAID5 conf printout:
 --- rd:6 wd:1 fd:5
 disk 0, o:1, dev:sde1
raid5: failed to run raid set md2
md: pers->run() failed ...
md :do_md_run() returned -22
md: md2 stopped.
md: unbind
md: export_rdev(sde1)
md: considering sdd1 ...
md:  adding sdd1 ...
md:  adding sdc1 ...
md: sdb3 has different UUID to sdd1
md: sdb1 has different UUID to sdd1
md: sda3 has different UUID to sdd1
md: sda1 has different UUID to sdd1
md: created md2
md: bind
md: bind
md: running: 
md2: setting max_sectors to 64, segment boundary to 16383
raid0: looking at sdd1
raid0:   comparing sdd1(71681920) with sdd1(71681920)
raid0:   END
raid0:   ==> UNIQUE
raid0: 1 zones
raid0: looking at sdc1
raid0:   comparing sdc1(71681920) with sdd1(71681920)
raid0:   EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 143363840 blocks.
raid0 : conf->hash_spacing is 143363840 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 4 bytes for hash.
md: considering sdb3 ...
md:  adding sdb3 ...
md: sdb1 has different UUID to sdb3
md:  adding sda3 ...
md: sda1 has different UUID to sdb3
md: created md1
md: bind
md: bind
md: running: 
raid1: raid set md1 active with 2 out of 2 mirrors
md: considering sdb1 ...
md:  adding sdb1 ...
md:  adding sda1 ...
md: created md0
md: bind
md: bind
md: running: 
raid1: raid set md0 active with 2 out of 2 mirrors
md: ... autorun DONE.
ReiserFS: md0: found reiserfs format "3.6" with standard journal
ReiserFS: md0: using ordered data mode
ReiserFS: md0: journal params: device md0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: md0: checking transaction log (md0)
ReiserFS: md0: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 212k freed

    2.6.9

    Linux version 2.6.9 (root@calculon) (gcc version 3.3.3 20040412 (Gentoo Linux 3.3.3-r6, ssp-3.3.2-2, pie-8.7.6)) #5 SMP Fri Nov 19 17:03:00 CST 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000f7ff0000 (usable)
 BIOS-e820: 00000000f7ff0000 - 00000000f7fff000 (ACPI data)
 BIOS-e820: 00000000f7fff000 - 00000000f8000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000108000000 (usable)
Warning only 4GB will be used.
Use a PAE enabled kernel.
3200MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000ff780
DMI 2.3 present.
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
Processor #6 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
Processor #1 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled)
Processor #7 15:2 APIC version 20
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
ACPI: IOAPIC (id[0x0a] address[0xfec80400] gsi_base[48])
IOAPIC[2]: apic_id 10, version 32, address 0xfec80400, GSI 48-71
ACPI: IOAPIC (id[0x0b] address[0xfec81000] gsi_base[72])
IOAPIC[3]: apic_id 11, version 32, address 0xfec81000, GSI 72-95
ACPI: IOAPIC (id[0x0c] address[0xfec81400] gsi_base[96])
IOAPIC[4]: apic_id 12, version 32, address 0xfec81400, GSI 96-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Enabling APIC mode:  Flat.  Using 5 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: BOOT_IMAGE=Linux2.6.9 ro root=900 gentoo=nodevfs console=ttyS0,38400
Initializing CPU#0
CPU 0 irqstacks, hard=c05cf000 soft=c05cb000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 2799.976 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 4023120k/4194304k available (3482k kernel code, 39132k reserved, 1175k data, 224k init, 3145664k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07
per-CPU timeslice cutoff: 1463.17 usecs.
task migration cache decay timeout: 2 msecs.
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c05d0000 soft=c05cc000
Initializing CPU#1
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07
Booting processor 2/6 eip 3000
CPU 2 irqstacks, hard=c05d1000 soft=c05cd000
Initializing CPU#2
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 3
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
CPU2: Intel P4/Xeon Extended MCE MSRs (12) available
CPU2: Thermal monitoring enabled
CPU2: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07
Booting processor 3/7 eip 3000
CPU 3 irqstacks, hard=c05d2000 soft=c05ce000
Initializing CPU#3
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 3
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
CPU3: Intel P4/Xeon Extended MCE MSRs (12) available
CPU3: Thermal monitoring enabled
CPU3: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07
Total of 4 processors activated (22282.24 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
checking TSC synchronization across 4 CPUs: passed.
Brought up 4 CPUs
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=7
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
ACPI: PCI interrupt 0000:07:01.0[A] -> GSI 48 (level, low) -> IRQ 48
ACPI: PCI interrupt 0000:07:01.1[B] -> GSI 49 (level, low) -> IRQ 49
ACPI: PCI interrupt 0000:06:03.0[A] -> GSI 24 (level, low) -> IRQ 24
ACPI: PCI interrupt 0000:06:03.1[B] -> GSI 25 (level, low) -> IRQ 25
ACPI: PCI interrupt 0000:04:02.0[A] -> GSI 98 (level, low) -> IRQ 98
ACPI: PCI interrupt 0000:04:02.1[B] -> GSI 99 (level, low) -> IRQ 99
ACPI: PCI interrupt 0000:01:01.0[A] -> GSI 19 (level, low) -> IRQ 19
ACPI: PCI interrupt 0000:01:02.0[A] -> GSI 18 (level, low) -> IRQ 18
Machine check exception polling timer started.
Starting balanced_irq
audit: initializing netlink socket (disabled)
audit(1101141976.018:0): initialized
highmem bounce pool size: 64 pages
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
SGI XFS with large block numbers, no debug enabled
Initializing Cryptographic API
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU1] (supports C1, 8 throttling states)
ACPI: Processor [CPU2] (supports C1)
ACPI: Processor [CPU3] (supports C1)
ACPI: Processor [CPU4] (supports C1)
Real Time Clock Driver v1.12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Using anticipatory io scheduler
FDC 0 is a post-1991 82077
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 5.3.19-k2
Copyright (c) 1999-2004 Intel Corporation.
ACPI: PCI interrupt 0000:07:01.0[A] -> GSI 48 (level, low) -> IRQ 48
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI interrupt 0000:07:01.1[B] -> GSI 49 (level, low) -> IRQ 49
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
e100: Intel(R) PRO/100 Network Driver, 3.0.27-k2-NAPI
e100: Copyright(c) 1999-2004 Intel Corporation
ACPI: PCI interrupt 0000:01:01.0[A] -> GSI 19 (level, low) -> IRQ 19
e100: eth2: e100_probe: addr 0xfdefe000, irq 19, MAC addr 00:E0:81:25:CF:17
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH3: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ICH3: chipset revision 2
ICH3: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
hda: SR244W, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ACPI: PCI interrupt 0000:04:02.0[A] -> GSI 98 (level, low) -> IRQ 98
ACPI: PCI interrupt 0000:04:02.1[B] -> GSI 99 (level, low) -> IRQ 99
scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11
        
        aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs

(scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, 16bit)
(scsi0:A:1): 160.000MB/s transfers (80.000MHz DT, 16bit)
  Vendor: SEAGATE   Model: ST318406LC        Rev: 010A
  Type:   Direct-Access                      ANSI SCSI revision: 03
scsi0:A:0:0: Tagged Queuing enabled.  Depth 32
  Vendor: SEAGATE   Model: ST318406LC        Rev: 010A
  Type:   Direct-Access                      ANSI SCSI revision: 03
scsi0:A:1:0: Tagged Queuing enabled.  Depth 32
scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11
        
        aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs

(scsi1:A:1): 160.000MB/s transfers (80.000MHz DT|IU|QAS, 16bit)
(scsi1:A:2): 160.000MB/s transfers (80.000MHz DT|IU|QAS, 16bit)
(scsi1:A:4): 160.000MB/s transfers (80.000MHz DT|IU|QAS, 16bit)
  Vendor: SEAGATE   Model: ST373307LC        Rev: 0007
  Type:   Direct-Access                      ANSI SCSI revision: 03
scsi1:A:1:0: Tagged Queuing enabled.  Depth 32
  Vendor: SEAGATE   Model: ST373307LC        Rev: 0007
  Type:   Direct-Access                      ANSI SCSI revision: 03
scsi1:A:2:0: Tagged Queuing enabled.  Depth 32
  Vendor: SEAGATE   Model: ST373307LC        Rev: 0007
  Type:   Direct-Access                      ANSI SCSI revision: 03
scsi1:A:4:0: Tagged Queuing enabled.  Depth 32
  Vendor: JMR ELEC  Model: FORTRA SERIES.    Rev: 1.21
  Type:   Processor                          ANSI SCSI revision: 02
megaraid cmm: 2.20.2.0 (Release Date: Thu Aug 19 09:58:33 EDT 2004)
megaraid: 2.20.4.0 (Release Date: Mon Sep 27 22:15:07 EDT 2004)
SCSI device sda: 35843670 512-byte hdwr sectors (18352 MB)
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 35843670 512-byte hdwr sectors (18352 MB)
SCSI device sdb: drive cache: write back
 sdb: sdb1 sdb2 sdb3
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
SCSI device sdc: 143374744 512-byte hdwr sectors (73408 MB)
SCSI device sdc: drive cache: write back
 sdc: sdc1
Attached scsi disk sdc at scsi1, channel 0, id 1, lun 0
SCSI device sdd: 143374744 512-byte hdwr sectors (73408 MB)
SCSI device sdd: drive cache: write back
 sdd: sdd1
Attached scsi disk sdd at scsi1, channel 0, id 2, lun 0
SCSI device sde: 143374744 512-byte hdwr sectors (73408 MB)
SCSI device sde: drive cache: write back
 sde: sde1
Attached scsi disk sde at scsi1, channel 0, id 4, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
Attached scsi generic sg1 at scsi0, channel 0, id 1, lun 0,  type 0
Attached scsi generic sg2 at scsi1, channel 0, id 1, lun 0,  type 0
Attached scsi generic sg3 at scsi1, channel 0, id 2, lun 0,  type 0
Attached scsi generic sg4 at scsi1, channel 0, id 4, lun 0,  type 0
Attached scsi generic sg5 at scsi1, channel 0, id 5, lun 0,  type 3
Fusion MPT base driver 3.01.16
Copyright (c) 1999-2004 LSI Logic Corporation
ACPI: PCI interrupt 0000:06:03.0[A] -> GSI 24 (level, low) -> IRQ 24
mptbase: Initiating ioc0 bringup
ioc0: 53C1030: Capabilities={Initiator}
ACPI: PCI interrupt 0000:06:03.1[B] -> GSI 25 (level, low) -> IRQ 25
mptbase: Initiating ioc1 bringup
ioc1: 53C1030: Capabilities={Initiator}
Fusion MPT SCSI Host driver 3.01.16
scsi2 : ioc0: LSI53C1030, FwRev=01013d00h, Ports=1, MaxQ=255, IRQ=24
  Vendor: SEAGATE   Model: ST373307LC        Rev: 0006
  Type:   Direct-Access                      ANSI SCSI revision: 03
SCSI device sdf: 143374744 512-byte hdwr sectors (73408 MB)
SCSI device sdf: drive cache: write back
 sdf: sdf1
Attached scsi disk sdf at scsi2, channel 0, id 1, lun 0
Attached scsi generic sg6 at scsi2, channel 0, id 1, lun 0,  type 0
  Vendor: SEAGATE   Model: ST373307LC        Rev: 0007
  Type:   Direct-Access                      ANSI SCSI revision: 03
SCSI device sdg: 143374744 512-byte hdwr sectors (73408 MB)
SCSI device sdg: drive cache: write back
 sdg: sdg1
Attached scsi disk sdg at scsi2, channel 0, id 2, lun 0
Attached scsi generic sg7 at scsi2, channel 0, id 2, lun 0,  type 0
  Vendor: JMR ELEC  Model: FORTRA SERIES.    Rev: 1.21
  Type:   Processor                          ANSI SCSI revision: 02
Attached scsi generic sg8 at scsi2, channel 0, id 5, lun 0,  type 3
scsi3 : ioc1: LSI53C1030, FwRev=01013d00h, Ports=1, MaxQ=255, IRQ=25
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: Intel Corp. 82801CA/CAM USB (Hub #1)
uhci_hcd 0000:00:1d.0: irq 16, io base 0000ec00
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid10 personality registered as nr 9
md: raid5 personality registered as nr 4
raid5: automatically using best checksumming function: pIII_sse
   pIII_sse  :  3604.000 MB/sec
raid5: using function: pIII_sse (3604.000 MB/sec)
raid6: int32x1    785 MB/s
raid6: int32x2   1027 MB/s
raid6: int32x4    742 MB/s
raid6: int32x8    550 MB/s
raid6: mmxx1     2277 MB/s
raid6: mmxx2     2867 MB/s
raid6: sse1x1    1480 MB/s
raid6: sse1x2    2066 MB/s
raid6: sse2x1    2570 MB/s
raid6: sse2x2    3058 MB/s
raid6: using algorithm sse2x2 (3058 MB/s)
md: raid6 personality registered as nr 8
md: multipath personality registered as nr 7
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
NET: Registered protocol family 2
IP: routing cache hash table of 32768 buckets, 256Kbytes
TCP: Hash tables configured (established 524288 bind 65536)
ip_conntrack version 2.1 (8192 buckets, 65536 max) - 304 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost .  http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S5)
ACPI wakeup devices: 
PS2K PS2M SMBS AUDI MODM USB0 USB1 USB2 P0P1 
md: Autodetecting RAID arrays.
md: autorun ...
md: considering sdg1 ...
md:  adding sdg1 ...
md:  adding sdf1 ...
md: sde1 has different UUID to sdg1
md: sdd1 has different UUID to sdg1
md: sdc1 has different UUID to sdg1
md: sdb3 has different UUID to sdg1
md: sdb1 has different UUID to sdg1
md: sda3 has different UUID to sdg1
md: sda1 has different UUID to sdg1
md: created md3
md: bind
md: bind
md: running: 
md3: setting max_sectors to 64, segment boundary to 16383
raid0: looking at sdg1
raid0:   comparing sdg1(71681920) with sdg1(71681920)
raid0:   END
raid0:   ==> UNIQUE
raid0: 1 zones
raid0: looking at sdf1
raid0:   comparing sdf1(71681920) with sdg1(71681920)
raid0:   EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 143363840 blocks.
raid0 : conf->hash_spacing is 143363840 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 4 bytes for hash.
md: considering sde1 ...
md:  adding sde1 ...
md: sdd1 has different UUID to sde1
md: sdc1 has different UUID to sde1
md: sdb3 has different UUID to sde1
md: sdb1 has different UUID to sde1
md: sda3 has different UUID to sde1
md: sda1 has different UUID to sde1
md: created md2
md: bind
md: running: 
raid5: device sde1 operational as raid disk 0
raid5: not enough operational devices for md2 (5/6 failed)
RAID5 conf printout:
 --- rd:6 wd:1 fd:5
 disk 0, o:1, dev:sde1
raid5: failed to run raid set md2
md: pers->run() failed ...
md :do_md_run() returned -22
md: md2 stopped.
md: unbind
md: export_rdev(sde1)
md: considering sdd1 ...
md:  adding sdd1 ...
md:  adding sdc1 ...
md: sdb3 has different UUID to sdd1
md: sdb1 has different UUID to sdd1
md: sda3 has different UUID to sdd1
md: sda1 has different UUID to sdd1
md: created md2
md: bind
md: bind
md: running: 
md2: setting max_sectors to 64, segment boundary to 16383
raid0: looking at sdd1
raid0:   comparing sdd1(71681920) with sdd1(71681920)
raid0:   END
raid0:   ==> UNIQUE
raid0: 1 zones
raid0: looking at sdc1
raid0:   comparing sdc1(71681920) with sdd1(71681920)
raid0:   EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 143363840 blocks.
raid0 : conf->hash_spacing is 143363840 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 4 bytes for hash.
md: considering sdb3 ...
md:  adding sdb3 ...
md: sdb1 has different UUID to sdb3
md:  adding sda3 ...
md: sda1 has different UUID to sdb3
md: created md1
md: bind
md: bind
md: running: 
raid1: raid set md1 active with 2 out of 2 mirrors
md: considering sdb1 ...
md:  adding sdb1 ...
md:  adding sda1 ...
md: created md0
md: bind
md: bind
md: running: 
raid1: raid set md0 active with 2 out of 2 mirrors
md: ... autorun DONE.
ReiserFS: md0: found reiserfs format "3.6" with standard journal
ReiserFS: md0: using ordered data mode
ReiserFS: md0: journal params: device md0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: md0: checking transaction log (md0)
ReiserFS: md0: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 224k freed

    2.6.10-rc2-bk4

    Linux version 2.6.10-rc2-bk4 (root@calculon) (gcc version 3.3.3 20040412 (Gentoo Linux 3.3.3-r6, ssp-3.3.2-2, pie-8.7.6)) #2 SMP Fri Nov 19 16:24:16 CST 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000f7ff0000 (usable)
 BIOS-e820: 00000000f7ff0000 - 00000000f7fff000 (ACPI data)
 BIOS-e820: 00000000f7fff000 - 00000000f8000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000108000000 (usable)
Warning only 4GB will be used.
Use a PAE enabled kernel.
3200MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000ff780
DMI 2.3 present.
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
Processor #6 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
Processor #1 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled)
Processor #7 15:2 APIC version 20
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
ACPI: IOAPIC (id[0x0a] address[0xfec80400] gsi_base[48])
IOAPIC[2]: apic_id 10, version 32, address 0xfec80400, GSI 48-71
ACPI: IOAPIC (id[0x0b] address[0xfec81000] gsi_base[72])
IOAPIC[3]: apic_id 11, version 32, address 0xfec81000, GSI 72-95
ACPI: IOAPIC (id[0x0c] address[0xfec81400] gsi_base[96])
IOAPIC[4]: apic_id 12, version 32, address 0xfec81400, GSI 96-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Enabling APIC mode:  Flat.  Using 5 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: BOOT_IMAGE=Linux2.6.10rc ro root=900 gentoo=nodevfs console=ttyS0,38400
Initializing CPU#0
CPU 0 irqstacks, hard=c05bf000 soft=c05bb000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 2799.707 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 4023204k/4194304k available (3450k kernel code, 39048k reserved, 1140k data, 228k init, 3145664k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07
per-CPU timeslice cutoff: 1463.17 usecs.
task migration cache decay timeout: 2 msecs.
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c05c0000 soft=c05bc000
Initializing CPU#1
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07
Booting processor 2/6 eip 3000
CPU 2 irqstacks, hard=c05c1000 soft=c05bd000
Initializing CPU#2
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 3
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
CPU2: Intel P4/Xeon Extended MCE MSRs (12) available
CPU2: Thermal monitoring enabled
CPU2: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07
Booting processor 3/7 eip 3000
CPU 3 irqstacks, hard=c05c2000 soft=c05be000
Initializing CPU#3
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 3
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
CPU3: Intel P4/Xeon Extended MCE MSRs (12) available
CPU3: Thermal monitoring enabled
CPU3: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07
Total of 4 processors activated (22282.24 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
checking TSC synchronization across 4 CPUs: passed.
Brought up 4 CPUs
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=7
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20041105
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically.  If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device().  As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior.  If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas@hp.com
** so I can fix the driver.
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1101142207.910:0): initialized
highmem bounce pool size: 64 pages
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
SGI XFS with large block numbers, no debug enabled
Initializing Cryptographic API
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU1] (supports 8 throttling states)
Real Time Clock Driver v1.12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
elevator: using anticipatory as default io scheduler
FDC 0 is a post-1991 82077
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 5.5.4-k2
Copyright (c) 1999-2004 Intel Corporation.
ACPI: PCI interrupt 0000:07:01.0[A] -> GSI 48 (level, low) -> IRQ 48
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI interrupt 0000:07:01.1[B] -> GSI 49 (level, low) -> IRQ 49
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
e100: Intel(R) PRO/100 Network Driver, 3.2.3-k2-NAPI
e100: Copyright(c) 1999-2004 Intel Corporation
ACPI: PCI interrupt 0000:01:01.0[A] -> GSI 19 (level, low) -> IRQ 19
e100: eth2: e100_probe: addr 0xfdefe000, irq 19, MAC addr 00:E0:81:25:CF:17
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH3: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ICH3: chipset revision 2
ICH3: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
hda: SR244W, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ACPI: PCI interrupt 0000:04:02.0[A] -> GSI 98 (level, low) -> IRQ 98
ACPI: PCI interrupt 0000:04:02.1[B] -> GSI 99 (level, low) -> IRQ 99
scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11
        
        aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs

(scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, 16bit)
(scsi0:A:1): 160.000MB/s transfers (80.000MHz DT, 16bit)
  Vendor: SEAGATE   Model: ST318406LC        Rev: 010A
  Type:   Direct-Access                      ANSI SCSI revision: 03
scsi0:A:0:0: Tagged Queuing enabled.  Depth 32
  Vendor: SEAGATE   Model: ST318406LC        Rev: 010A
  Type:   Direct-Access                      ANSI SCSI revision: 03
scsi0:A:1:0: Tagged Queuing enabled.  Depth 32
scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11
        
        aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs

(scsi1:A:1): 160.000MB/s transfers (80.000MHz DT|IU|QAS, 16bit)
(scsi1:A:2): 160.000MB/s transfers (80.000MHz DT|IU|QAS, 16bit)
(scsi1:A:4): 160.000MB/s transfers (80.000MHz DT|IU|QAS, 16bit)
  Vendor: SEAGATE   Model: ST373307LC        Rev: 0007
  Type:   Direct-Access                      ANSI SCSI revision: 03
scsi1:A:1:0: Tagged Queuing enabled.  Depth 32
  Vendor: SEAGATE   Model: ST373307LC        Rev: 0007
  Type:   Direct-Access                      ANSI SCSI revision: 03
scsi1:A:2:0: Tagged Queuing enabled.  Depth 32
  Vendor: SEAGATE   Model: ST373307LC        Rev: 0007
  Type:   Direct-Access                      ANSI SCSI revision: 03
scsi1:A:4:0: Tagged Queuing enabled.  Depth 32
  Vendor: JMR ELEC  Model: FORTRA SERIES.    Rev: 1.21
  Type:   Processor                          ANSI SCSI revision: 02
SCSI device sda: 35843670 512-byte hdwr sectors (18352 MB)
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 35843670 512-byte hdwr sectors (18352 MB)
SCSI device sdb: drive cache: write back
 sdb: sdb1 sdb2 sdb3
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
SCSI device sdc: 143374744 512-byte hdwr sectors (73408 MB)
SCSI device sdc: drive cache: write back
 sdc: sdc1
Attached scsi disk sdc at scsi1, channel 0, id 1, lun 0
SCSI device sdd: 143374744 512-byte hdwr sectors (73408 MB)
SCSI device sdd: drive cache: write back
 sdd: sdd1
Attached scsi disk sdd at scsi1, channel 0, id 2, lun 0
SCSI device sde: 143374744 512-byte hdwr sectors (73408 MB)
SCSI device sde: drive cache: write back
 sde: sde1
Attached scsi disk sde at scsi1, channel 0, id 4, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
Attached scsi generic sg1 at scsi0, channel 0, id 1, lun 0,  type 0
Attached scsi generic sg2 at scsi1, channel 0, id 1, lun 0,  type 0
Attached scsi generic sg3 at scsi1, channel 0, id 2, lun 0,  type 0
Attached scsi generic sg4 at scsi1, channel 0, id 4, lun 0,  type 0
Attached scsi generic sg5 at scsi1, channel 0, id 5, lun 0,  type 3
Fusion MPT base driver 3.01.17
Copyright (c) 1999-2004 LSI Logic Corporation
ACPI: PCI interrupt 0000:06:03.0[A] -> GSI 24 (level, low) -> IRQ 24
mptbase: Initiating ioc0 bringup
ioc0: 53C1030: Capabilities={Initiator}
ACPI: PCI interrupt 0000:06:03.1[B] -> GSI 25 (level, low) -> IRQ 25
mptbase: Initiating ioc1 bringup
ioc1: 53C1030: Capabilities={Initiator}
Fusion MPT SCSI Host driver 3.01.17
scsi2 : ioc0: LSI53C1030, FwRev=01013d00h, Ports=1, MaxQ=255, IRQ=24
  Vendor: SEAGATE   Model: ST373307LC        Rev: 0006
  Type:   Direct-Access                      ANSI SCSI revision: 03
SCSI device sdf: 143374744 512-byte hdwr sectors (73408 MB)
SCSI device sdf: drive cache: write back
 sdf: sdf1
Attached scsi disk sdf at scsi2, channel 0, id 1, lun 0
Attached scsi generic sg6 at scsi2, channel 0, id 1, lun 0,  type 0
  Vendor: SEAGATE   Model: ST373307LC        Rev: 0007
  Type:   Direct-Access                      ANSI SCSI revision: 03
SCSI device sdg: 143374744 512-byte hdwr sectors (73408 MB)
SCSI device sdg: drive cache: write back
 sdg: sdg1
Attached scsi disk sdg at scsi2, channel 0, id 2, lun 0
Attached scsi generic sg7 at scsi2, channel 0, id 2, lun 0,  type 0
  Vendor: JMR ELEC  Model: FORTRA SERIES.    Rev: 1.21
  Type:   Processor                          ANSI SCSI revision: 02
Attached scsi generic sg8 at scsi2, channel 0, id 5, lun 0,  type 3
scsi3 : ioc1: LSI53C1030, FwRev=01013d00h, Ports=1, MaxQ=255, IRQ=25
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: Intel Corp. 82801CA/CAM USB (Hub #1)
uhci_hcd 0000:00:1d.0: irq 16, io base 0xec00
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid10 personality registered as nr 9
md: raid5 personality registered as nr 4
raid5: automatically using best checksumming function: pIII_sse
   pIII_sse  :  3604.000 MB/sec
raid5: using function: pIII_sse (3604.000 MB/sec)
raid6: int32x1    785 MB/s
raid6: int32x2   1054 MB/s
raid6: int32x4    746 MB/s
raid6: int32x8    550 MB/s
raid6: mmxx1     2308 MB/s
raid6: mmxx2     2882 MB/s
raid6: sse1x1    1496 MB/s
raid6: sse1x2    2066 MB/s
raid6: sse2x1    2453 MB/s
raid6: sse2x2    3070 MB/s
raid6: using algorithm sse2x2 (3070 MB/s)
md: raid6 personality registered as nr 8
md: multipath personality registered as nr 7
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
device-mapper: 4.3.0-ioctl (2004-09-30) initialised: dm-devel@redhat.com
NET: Registered protocol family 2
IP: routing cache hash table of 32768 buckets, 256Kbytes
TCP: Hash tables configured (established 524288 bind 65536)
ip_conntrack version 2.1 (8192 buckets, 65536 max) - 304 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost .  http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
Starting balanced_irq
ACPI: (supports S0 S1 S5)
ACPI wakeup devices: 
PS2K PS2M SMBS AUDI MODM USB0 USB1 USB2 P0P1 
md: Autodetecting RAID arrays.
md: autorun ...
md: considering sdg1 ...
md:  adding sdg1 ...
md:  adding sdf1 ...
md: sde1 has different UUID to sdg1
md: sdd1 has different UUID to sdg1
md: sdc1 has different UUID to sdg1
md: sdb3 has different UUID to sdg1
md: sdb1 has different UUID to sdg1
md: sda3 has different UUID to sdg1
md: sda1 has different UUID to sdg1
md: created md3
md: bind
md: bind
md: running: 
md3: setting max_sectors to 64, segment boundary to 16383
raid0: looking at sdg1
raid0:   comparing sdg1(71681920) with sdg1(71681920)
raid0:   END
raid0:   ==> UNIQUE
raid0: 1 zones
raid0: looking at sdf1
raid0:   comparing sdf1(71681920) with sdg1(71681920)
raid0:   EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 143363840 blocks.
raid0 : conf->hash_spacing is 143363840 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 4 bytes for hash.
md: considering sde1 ...
md:  adding sde1 ...
md: sdd1 has different UUID to sde1
md: sdc1 has different UUID to sde1
md: sdb3 has different UUID to sde1
md: sdb1 has different UUID to sde1
md: sda3 has different UUID to sde1
md: sda1 has different UUID to sde1
md: created md2
md: bind
md: running: 
raid5: device sde1 operational as raid disk 0
raid5: not enough operational devices for md2 (5/6 failed)
RAID5 conf printout:
 --- rd:6 wd:1 fd:5
 disk 0, o:1, dev:sde1
raid5: failed to run raid set md2
md: pers->run() failed ...
md: do_md_run() returned -22
md: md2 stopped.
md: unbind
md: export_rdev(sde1)
md: considering sdd1 ...
md:  adding sdd1 ...
md:  adding sdc1 ...
md: sdb3 has different UUID to sdd1
md: sdb1 has different UUID to sdd1
md: sda3 has different UUID to sdd1
md: sda1 has different UUID to sdd1
md: created md2
md: bind
md: bind
md: running: 
md2: setting max_sectors to 64, segment boundary to 16383
raid0: looking at sdd1
raid0:   comparing sdd1(71681920) with sdd1(71681920)
raid0:   END
raid0:   ==> UNIQUE
raid0: 1 zones
raid0: looking at sdc1
raid0:   comparing sdc1(71681920) with sdd1(71681920)
raid0:   EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 143363840 blocks.
raid0 : conf->hash_spacing is 143363840 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 4 bytes for hash.
md: considering sdb3 ...
md:  adding sdb3 ...
md: sd